Water standing in low spots on garage, shop and warehouse floors can often last for days creating safety problems and cleaning issues. During the troweling of floors some uneven ness can create low spots where spilled liquids can form. Low spots or depressions can now be filled in with 100% solid epoxy to bring them to level. Berms can also be adhered within an epoxy floor to contain liquid spills rendering them easy to squeegee out. Often containment of liquids to safe areas is all that is needed to avoid damage to items stored on the same floor.

An easy way to berm flooring to contain potential liquid spills is to hot glue strips of molding onto the floor before the epoxy flooring is applied. The epoxy flooring then seals the edges of the molding to the floor creating a watertight barrier. Often just ¼ inch of berm is all that is needed to contain liquid spills to areas where they can be easily squeegeed dry.

Epoxy flooring is not only seamless but can be Class III Laboratory qualified. These mold and mildew resistant surfaces are easy to clean with hoses and squeegees. Bleach resistant epoxy flooring can take strong cleaners and heavy abrasion.

Epoxy coatings have been used successfully in swimming pools, laundries, warehouses, garages, and various types of shops for decades. Epoxy floors offer the option of smooth or fine skid resistant textured surfaces that are still easy to mop and squeegee clean.

Epoxy floors can be flooded, pressure washed and scrubbed back into service in minutes. Mold, bacteria, and contaminants can be rinsed off. The surfaces are impervious to penetration by liquid-born contaminants. Even diesel, gas, and oil will not penetrate them and can be washed or wiped up. Old technology floorings, including paint, carpeting, vinyl tile, linoleum, and wood, are subject to severe contamination and damage if flood cleansing is used. Beautiful flood-proof epoxy coated flooring can be used from wall to wall, often including coated vertical surfaces to help further contain liquids.

Durall Industrial Flooring supplies kits of materials that are customized to owner specification and delivered directly to the job site. Kits include full directions and 24/7 help lines staffed by seasoned flooring experts, so professionals and amateurs alike can successfully install a quality floor.

Web visitors can obtain free, job-specific quotes on materials or nationwide turnkey installations by completing a simple questionnaire at http://www.concrete-floor-coatings.com.

For a high-resolution photo example, visit: http://www.concrete-floor-coatings.com/photos

For more information, contact Harvey Chichester at: harvey@concrete-floor-coatings.com Phone: 1-800-466-8910 or 952-888-1488 (24/7)

You’ll take the checker flag every time when you show off your collector cars on a checkerboard floor.

Now the Internet can get you complete quotes with step-by-step instructions on how to put down the checkerboard floor you have always dreamed of. By being artistic, you can make concrete floors develop character and give you easy maintenance. All too often collectors fail to take full creative advantage of their facilities largest single surface, their floors. Epoxy coatings can not only give you the ease of maintenance associated with a class III laboratory floor surface but great individualized looks as well.

Your project will start by measuring your floors, length and width. Then decide on the size and color of the squares that you want. 24″ x 24″ squares will be less work than 12″ x 12″ and will not give that tile look. The color can be traditional black and white, but if you have a blue car, dark blue might be the answer. Naturally, if you’re going to do the work to achieve a custom checkerboard floor you want it to last. Just as with that glowing car finish, we all know that it is prep, prep, and prep that make the difference between a good job and a great job.

Ever notice how when you walk across concrete in your socks they get all dusty on the bottoms. That’s because concrete continuously deteriorates and breaks apart leaving the garage dusty like your socks. A few dips of oil on concrete might still be seen years later as the oil soaks into porous concrete. But if you seal the floor with an epoxy coating that adheres well to the concrete because your prep job was good, you can just wipe off oil, gas, and dirt with a rag. You can hose out and squeegee that garage floor to a clean shiny surface in minutes.

Your prep should include a high alkaline cleaner used with a rotary scrubber and a black pad or stiff Nilo grit type concrete brush. Your prep should include a high alkaline degreaser to bring the pH of the floor up to nearly 12 as it removes the left over adhesive and contaminants. Then you shock the concrete and contaminants into letting go by switching to scrubbing with an acidic cleaner containing water softeners, detergents, and rinse agents that bring the floor down to a pH of 3.5. This jump in pH will force contaminants and vulnerable cement particles to release from the floor. The acidic cleaner also opens the floor up to allow the epoxy top coats to create a strong long-lasting bond. A final scrub rinse and the floor is ready to dry and start accepting repairs and artistic coloring.

First you should coat the entire floor with two coats of your light color. You can screen between coats with your scrubber to remove any sand, bugs or contaminants that fell into the first coat. Next pull a chalk line diagonally through the widest part of your floor to set your pattern. Now lay down any size template squares side by side in two rows along the chalk line, and remove every other one. Using blue tape, place paper that is cut one inch smaller than your templates, setting them in the open squares. Tape the paper masking down with blue tape and move on. Once complete, you just walk on the paper and use a roller and brush to fill in the open squares. Note that for best results, brush from the tape towards the center to avoid getting epoxy leaking under your tape. One coat of your dark color should be sufficient. Once you have filled in all the open squares with your dark color be sure to remove the tape and masking paper. You don’t want to glue that tape to your floor.

Durall Industrial Flooring supplies kits of materials including checkerboard templates in 24″ x 24″ size that are customized to owner specification and delivered directly to the job site. Kits include full directions and 24/7 help lines staffed by seasoned flooring experts, so professionals and amateurs alike can successfully install a quality floor.

Web visitors can obtain free, job-specific quotes on materials or nationwide turnkey installations by completing a simple questionnaire at http://www.concrete-floor-coatings.com.

For high-resolution photo examples, visit: http://www.concrete-floor-coatings.com/photos/checkerboard

For more information, contact Harvey Chichester at: harvey@concrete-floor-coatings.com Phone: 1-800-466-8910 or 952-888-1488 (24/7)

###

Suppliers of floor coatings to businesses and do-it-yourself home owners are deploying real-time technical phone support in order to solve the problem of improper installation.

The trick to creating a quality floor coating is getting the coating to adhere to the substrate surface with out chipping, peeling, or lifting. The key is preparation of the floor surface. But good surface preparation is a direct function of the experience and training of the applicator. Technical help lines now provide the business maintenance crews and homeowner the necessary on-the-job training and factory direct experience by phone. This kind of personal support greatly enhances the custom-built kits that suppliers are providing to homeowners.

Highly chemical- and wear-resistant, epoxy coatings have been used on concrete floors for decades in the industrial arena. These coated floors are easy to maintain with enhanced beauty and reduced wear. Unfortunately, these industrial grade coatings are generally not placed on the shelves of hardware stores and big box retailers due to liability concerns. In addition, store clerks are usually unable to provide the needed guidance for proper application of these industrial grade products.

One epoxy coating manufacture that is leading the way on this type of support is Durall Industrial Flooring of Minneapolis, MN. Durall enables individuals and project managers to obtain free, job-specific quotes on materials as well as nationwide turnkey installations by completing a simple questionnaire at www.concrete-floor-coatings.com.

For photo examples and more detail, visit www.concrete-floor-coatings.com

For more information, contact Harvey Chichester at harvey@concrete-floor-coatings.com

Phone: 1-800-466-8910 or 952-888-1488 (24/7)